Modern Santa Claus Christmas Ornament (Without Support) 3D Printer Model
The file 'Modern Santa Claus Christmas Ornament (Without Support) 3D Printer Model' is (stl) file type, size is 104.2KB.
The file 'Modern Santa Claus Christmas Ornament (Without Support) 3D Printer Model' is (stl) file type, size is 104.2KB.
- The "Download All Files" appears to be broken momentarily. But you can still download the file under the "Thing Files" tab above -
No glue required! The assembly of this ornament solely relies on the little Connector Pieces.
Therefore I recommend printing the Test_Fit_Pieces.stl first to ensure that your printer can print these with the correct tolerances.
Then you can also choose in which version you want to print all the pieces that have three different tightness variations.
For me, Version 2 (Normal Fit) works perfectly.
Be careful when inserting them. Here are some suggestions for the assembly:
The beard piece has the supports already added to the model. I recommend printing this with cooling turned fully on for the best possible overhangs.
The overall weight of the model with 15% Infill and 2 Perimeters is 47 g (14 g red parts and 33 g white parts).
| 1Tight_FitConnector_Piece.stl | 12.2KB | |
| 1Tight_FitMustache.stl | 9.0KB | |
| 1Tight_FitNose.stl | 11.0KB | |
| 2Normal_FitConnector_Piece.stl | 12.2KB | |
| 2Normal_FitMustache.stl | 9.0KB | |
| 2Normal_FitNose.stl | 11.0KB | |
| 3Loose_FitConnector_Piece.stl | 12.2KB | |
| 3Loose_FitMustache.stl | 9.0KB | |
| 3Loose_FitNose.stl | 11.0KB | |
| Beard.stl | 48.1KB | |
| Bobble_Without_Hanging_Option.stl | 5.6KB | |
| Bobble_With_Hanging_Option.stl | 19.1KB | |
| Hat.stl | 11.7KB | |
| Test_Fit_Pieces.stl | 117.7KB |
