Modern knob for door or drawer
A cylindrical knob with a notch for a good finger grip.
Small footprint, quick printing time with no surprise, robust.
Fits 3.5 to 4.5mm wood screws (4 to 8 imperial gauge).
Can be tapped to fit M3 to M4 threaded screws (gauge 5 to 8 imperial).
Mounting :
A logo at the top helps alling horizontaly : the loop must be down.
Pre drill a hole in the door or drawer front.
Pick preferabily a button head screw
It must runs freely thru the door or drawer hole.
Insert it into the hole.
Apply the knob end on the screw pin and start driving.
Before to lock the screw, check the knob is perfectly alligned.
If necessary rotate the knob to adjust it.
Then hold the knob firmly then tight the screw until it locks.
Don't overtight the screw.
Enjoy.
| BoutonDeTiroirTiroirHaut_Cabinet_J-Max_Prusa_i3_CabinetS.STL | 1.9MB |
