The file 'Model Rocket Motor Test Stand 3D Printer Model' is (STL,stl) file type, size is 18.7MB.
Project Vulcan is a model rocket motor test stand. Which means at its core it is a measuring device. It measures how much thrust a motor produces. We measure this thrust through the use of a load cell – the same type of electronic device that is in your weight scale. With this test stand the motor is placed in a downward position (with the motor exhaust coming out of the top). When the motor is ignited it presses down on the load-cell. That creates a small change in the electrical current and that change is measured and recorded.
View our Instructable at https://www.instructables.com/Project-Vulcan-a-Model-Rocket-Motor-Test-Stand/
Visit our web site at https://rocketryjournal.wordpress.com/
Our YouTube channel is at https://www.youtube.com/@AustinAerospace
Our software is found at https://sourceforge.net/u/austinaerospace/profile/
The Tinkercad drawings for this project can be found at
| 18mm_retainer__threads.STL | 848.2KB | |
| 18mm_threaded_retainer_ring.STL | 1.9MB | |
| 24mm_Motor_Retainer_Part_A.stl | 865.1KB | |
| 24mm_Motor_Retainer_Part_B.stl | 29.5MB | |
| 80_percent_cap_50mm.stl | 359.3KB | |
| 80_percent_Support_50mm.stl | 1.3MB | |
| Continuity_Lamp_V2.stl | 550.0KB | |
| RH_Bottom_V4.6.stl | 500.9KB | |
| RH_Top_V4.7.stl | 445.5KB | |
| Test_Stand-Lighting_Conduit_T-fitting_V2.stl | 26.4KB | |
| Test_Stand_24mm_Centering_Rings_2022-12-22.stl | 25.1KB | |
| Test_Stand_Warning_Lamps_2023-02-08.stl | 384.5KB | |
| V2.1_Test_Stand_Component_Housing.stl | 3.0MB | |
| V2_Test_Stand_Component_Cover.stl | 80.6KB |
