This is a 3D printable model rocket capable of accepting Estes 24mm D or E engines. Each module features twist-lock couplers making it easy to assemble, disassemble, and repair. Simply slide two modules together, then twist clockwise until they click together. If each module is printed separately with a fixed Z-seam, the Z-seams should line up.
The rocket in the thumbnail is made up of
The nose cone accepts a 1-1/8" eye hook for attaching the shock cord. The other end of the shock cord can be attached to the inside of a nose cone adapter module using Estes' method:
You then can attach your parachute to the shock cord or the nose cone eye hook.
The nose cone is deliberately a bit snug in the nose cone adapter module to allow it to be sanded down to a perfect fit.
Happy flying!
| 24mm_engine_tube_cap.stl | 1.4MB | |
| 2in_x_4in_1-8in_Launch_Lugs.stl | 415.3KB | |
| 2in_x_4in_Fins_with_24mm_engine_holder.stl | 1.6MB | |
| 2in_x_4in_Fuselage.stl | 240.5KB | |
| 2in_x_4in_Long_Fins_with_24mm_engine_holder.stl | 1.6MB | |
| 2in_x_4in_Nose_cone.stl | 576.6KB | |
| 2in_x_4in_Nose_Cone_Adapter.stl | 231.5KB | |
| D_engine_spacer.stl | 56.3KB |
