The file 'Model Rocket Kit 3D Printer Model' is (SLDPRT,STL,ork) file type, size is 49.7MB.
A model rocket kit for Estes BT-55 body tubes. Choose from 4 nose cones and 3 fin sets. Or take the solidworks files and make your own!
I recommend using a cardboard body tube, but if you are determined to print your own or want to try a multi-stage rocket, check out this remix: https://www.thingiverse.com/thing:4423394
Based loosely on the Estes Amazon.
Wall thickness is 1.6mm, so best printed with a 0.4mm nozzle. base_swept_12.stl is an experimental 1.2mm wall thickness version.
This rocket flew beautifully with Estes D12-5, but it should work with other 24x70mm motors like Estes C11. See the Open Rocket simulation file.
You can also print 2x 18_mm_motor_adapter and use 18mm motors like Estes C6-3.
There's a shock cord mount near the bottom of base_*.stl. If you mount your shock cord here, make sure it's made of kevlar or some other very heat resistant material.
Here's a video of the rocket blasting into the sky in slow motion: https://www.youtube.com/watch?v=r5LMzHydy4g
| 18_mm_motor_adapter.SLDPRT | 272.0KB | |
| 18_mm_motor_adapter.STL | 351.6KB | |
| 24mm_motor_cap.SLDPRT | 408.5KB | |
| 24mm_motor_cap.STL | 2.6MB | |
| base_forward_swept.SLDPRT | 664.0KB | |
| base_forward_swept.STL | 15.5MB | |
| base_round.SLDPRT | 671.5KB | |
| base_round.STL | 15.7MB | |
| base_swept.SLDPRT | 672.0KB | |
| base_swept.STL | 15.5MB | |
| base_swept_12.SLDPRT | 671.0KB | |
| base_swept_12.STL | 22.6MB | |
| nosecone.SLDPRT | 282.0KB | |
| nosecone.STL | 8.8MB | |
| nosecone_conical.SLDPRT | 499.5KB | |
| nosecone_conical.STL | 8.7MB | |
| nosecone_snub.SLDPRT | 313.5KB | |
| nosecone_snub.STL | 10.1MB | |
| nosecone_spearhead.SLDPRT | 460.5KB | |
| nosecone_spearhead.STL | 18.7MB | |
| sim.ork | 2.4KB |
