Model Rocket (Body & Nose Cone) 3D Printer Model
The file 'Model Rocket (Body & Nose Cone) 3D Printer Model' is (stl) file type, size is 132.5KB.
The file 'Model Rocket (Body & Nose Cone) 3D Printer Model' is (stl) file type, size is 132.5KB.
@duckydude8
No parachute needed (Nor will one fit)
A-C Motors may be used
I just used a little bit of super glue and cut a long rubber band in order to secure it on the inside, the nose cone has a hole in the bottom that you may thread a zip tie through to be used as a tie on point
I've tested this and it works super well!
While using a C motor be sure that the winds are calm and you are located in a very large open area, I've found that when a C motor is used the rocket can go out of view very easy, for this reason bright colors might also be helpful
| Body.stl | 142.2KB | |
| Nose_Cone.stl | 267.4KB |
