Model Aircraft Stand 3D Printer Model
The file 'Model Aircraft Stand 3D Printer Model' is (stl) file type, size is 296.2KB.
The file 'Model Aircraft Stand 3D Printer Model' is (stl) file type, size is 296.2KB.
I made this remix because I wanted to be able to print the upright portion flat on the bed for strength. I also designed a new plane holder because I felt it needed a cap on the end to stop the holder from sliding off backwards.
Printed at 0.2mm layer height 25% cubic infill. Supports required for the plane holder and the base for the screw head recesses.
I used 10mm M3 bolts and M3 nuts to attach the upgright to the base. The plane holder should sit nicely on the upright but if it does not you can easily file or cut away at the inside of it so that it does.
All credit goes to the original author.
| Model_plane_stand_base.stl | 618.1KB | |
| Model_plane_stand_plane_holder.stl | 224.4KB | |
| Model_plane_stand_upright.stl | 175.1KB |
