Mode Gakuen Cocoon Tower .. Rebuild… N-scale 3D Printer Model
The file 'Mode Gakuen Cocoon Tower .. Rebuild… N-scale 3D Printer Model' is (stl) file type, size is 380.0KB.
The file 'Mode Gakuen Cocoon Tower .. Rebuild… N-scale 3D Printer Model' is (stl) file type, size is 380.0KB.
A total Rebuild for the Mode Gakuen Cocoon Tower for N-Scale
This one is taller and a bit "fatter" and hopefully neater.
Don't loose track of which level is which..
I will print the two halves first then print and build as I go.
Edit, 9 Jan 2024... Level 5 had minor issue.. Fixed. Ring 5 slightly too big.. Fixed
| Cocoon_tower.stl | 235.7KB | |
| Cocoon_tower_doors_x2.stl | 2.9KB | |
| Cocoon_tower_levels_1.stl | 27.2KB | |
| Cocoon_tower_levels_10.stl | 34.1KB | |
| Cocoon_tower_levels_11.stl | 42.3KB | |
| Cocoon_tower_levels_2.stl | 34.8KB | |
| Cocoon_tower_levels_3.stl | 34.8KB | |
| Cocoon_tower_levels_4.stl | 27.4KB | |
| Cocoon_tower_levels_5.stl | 34.5KB | |
| Cocoon_tower_levels_6.stl | 34.8KB | |
| Cocoon_tower_levels_7.stl | 34.7KB | |
| Cocoon_tower_levels_8.stl | 26.6KB | |
| Cocoon_tower_levels_9.stl | 34.6KB | |
| Cocoon_tower_lower.stl | 52.4KB | |
| Cocoon_tower_lower_windows.stl | 2.4KB | |
| Cocoon_tower_rings_1.stl | 21.0KB | |
| Cocoon_tower_rings_10.stl | 17.7KB | |
| Cocoon_tower_rings_11.stl | 17.7KB | |
| Cocoon_tower_rings_2.stl | 17.7KB | |
| Cocoon_tower_rings_3.stl | 17.7KB | |
| Cocoon_tower_rings_4.stl | 17.9KB | |
| Cocoon_tower_rings_5.stl | 18.1KB | |
| Cocoon_tower_rings_6.stl | 17.9KB | |
| Cocoon_tower_rings_7.stl | 17.7KB | |
| Cocoon_tower_rings_8.stl | 17.7KB | |
| Cocoon_tower_rings_9.stl | 17.7KB | |
| Cocoon_tower_upper.stl | 194.7KB | |
| Cocoon_tower_windows_x4.stl | 3.4KB |
