MOD 1.0 SPUR GEAR COLLECTION 3D Printer Model
The file 'MOD 1.0 SPUR GEAR COLLECTION 3D Printer Model' is (STL) file type, size is 2.4MB.
The file 'MOD 1.0 SPUR GEAR COLLECTION 3D Printer Model' is (STL) file type, size is 2.4MB.
I created all of these spur gears in SolidWorks for a project I am working on.
For each one I created I made a 3D printed configuration for easy 3D printing rather than machining.
There are 43 gears total with the following teeth.
12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,
28,30,32,35,36,38,40,42,45,48,50,52,54,55,56,60,
64,65,70,72,75,80,85,90,100,120
All of the MOD 1.0 gears in this collection are:
5mm Thick
5mm Pilot hole
0.6mm Chamfer to top and bottom so no cleanup due to squish.
All files checked in Simplify3D for errors and none were found.
See my other files for other MOD sizes
| MOD_1.0_100_TOOTH.STL | 330.7KB | |
| MOD_1.0_120_TOOTH.STL | 346.4KB | |
| MOD_1.0_12_TOOTH.STL | 114.1KB | |
| MOD_1.0_13_TOOTH.STL | 119.0KB | |
| MOD_1.0_14_TOOTH.STL | 125.9KB | |
| MOD_1.0_15_TOOTH.STL | 123.7KB | |
| MOD_1.0_16_TOOTH.STL | 124.5KB | |
| MOD_1.0_17_TOOTH.STL | 134.5KB | |
| MOD_1.0_18_TOOTH.STL | 137.8KB | |
| MOD_1.0_19_TOOTH.STL | 144.4KB | |
| MOD_1.0_20_TOOTH.STL | 151.1KB | |
| MOD_1.0_21_TOOTH.STL | 157.7KB | |
| MOD_1.0_22_TOOTH.STL | 151.4KB | |
| MOD_1.0_23_TOOTH.STL | 148.5KB | |
| MOD_1.0_24_TOOTH.STL | 144.8KB | |
| MOD_1.0_25_TOOTH.STL | 150.1KB | |
| MOD_1.0_26_TOOTH.STL | 155.4KB | |
| MOD_1.0_27_TOOTH.STL | 160.6KB | |
| MOD_1.0_28_TOOTH.STL | 165.9KB | |
| MOD_1.0_30_TOOTH.STL | 176.4KB | |
| MOD_1.0_32_TOOTH.STL | 187.0KB | |
| MOD_1.0_35_TOOTH.STL | 202.8KB | |
| MOD_1.0_36_TOOTH.STL | 208.1KB | |
| MOD_1.0_38_TOOTH.STL | 211.2KB | |
| MOD_1.0_40_TOOTH.STL | 221.4KB | |
| MOD_1.0_42_TOOTH.STL | 182.3KB | |
| MOD_1.0_45_TOOTH.STL | 194.0KB | |
| MOD_1.0_48_TOOTH.STL | 187.0KB | |
| MOD_1.0_50_TOOTH.STL | 194.0KB | |
| MOD_1.0_52_TOOTH.STL | 201.1KB | |
| MOD_1.0_54_TOOTH.STL | 229.2KB | |
| MOD_1.0_55_TOOTH.STL | 233.1KB | |
| MOD_1.0_56_TOOTH.STL | 237.0KB | |
| MOD_1.0_60_TOOTH.STL | 252.6KB | |
| MOD_1.0_64_TOOTH.STL | 218.2KB | |
| MOD_1.0_65_TOOTH.STL | 221.4KB | |
| MOD_1.0_70_TOOTH.STL | 237.0KB | |
| MOD_1.0_72_TOOTH.STL | 243.2KB | |
| MOD_1.0_75_TOOTH.STL | 252.6KB | |
| MOD_1.0_80_TOOTH.STL | 268.2KB | |
| MOD_1.0_85_TOOTH.STL | 283.9KB | |
| MOD_1.0_90_TOOTH.STL | 299.5KB | |
| MOD_1.0_96_TOOTH.STL | 318.2KB |
