MOD 0.5 SPUR GEAR COLLECTION 3D Printer Model
The file 'MOD 0.5 SPUR GEAR COLLECTION 3D Printer Model' is (STL) file type, size is 2.3MB.
The file 'MOD 0.5 SPUR GEAR COLLECTION 3D Printer Model' is (STL) file type, size is 2.3MB.
I created all of these spur gears in SolidWorks for a project I am working on.
For each one I created I made a 3D printed configuration for easy 3D printing rather than machining.
There are 41 gears total with the following teeth.
14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,30,
32,35,36,38,40,42,45,48,50,52,54,55,56,60,64,65,
70,72,75,80,85,90,96,100,120
All of the MOD 0.5 gears in this collection are:
4mm Thick
2mm Pilot hole
0.2mm Chamfer to top am bottom to minimize squish.
All files checked in Simplify3D for errors and none were found.
YOU WILL NEED A WELL CALIBRATED MACHINE FOR THESE AS THE TEETH ARE VERY SMALL. THE 14 TOOTH IN MY PIC IS ONLY 7.5mm in DIAMETER !!
| MOD_0.5_100_TOOTH.STL | 330.7KB | |
| MOD_0.5_120_TOOTH.STL | 346.4KB | |
| MOD_0.5_14_TOOTH.STL | 119.4KB | |
| MOD_0.5_15_TOOTH.STL | 120.8KB | |
| MOD_0.5_16_TOOTH.STL | 115.1KB | |
| MOD_0.5_17_TOOTH.STL | 121.2KB | |
| MOD_0.5_18_TOOTH.STL | 127.2KB | |
| MOD_0.5_19_TOOTH.STL | 133.3KB | |
| MOD_0.5_20_TOOTH.STL | 127.6KB | |
| MOD_0.5_21_TOOTH.STL | 133.1KB | |
| MOD_0.5_22_TOOTH.STL | 138.6KB | |
| MOD_0.5_23_TOOTH.STL | 144.0KB | |
| MOD_0.5_24_TOOTH.STL | 149.5KB | |
| MOD_0.5_25_TOOTH.STL | 155.0KB | |
| MOD_0.5_26_TOOTH.STL | 160.4KB | |
| MOD_0.5_27_TOOTH.STL | 165.9KB | |
| MOD_0.5_28_TOOTH.STL | 171.4KB | |
| MOD_0.5_30_TOOTH.STL | 182.3KB | |
| MOD_0.5_32_TOOTH.STL | 193.2KB | |
| MOD_0.5_35_TOOTH.STL | 196.0KB | |
| MOD_0.5_36_TOOTH.STL | 201.1KB | |
| MOD_0.5_38_TOOTH.STL | 211.2KB | |
| MOD_0.5_40_TOOTH.STL | 221.4KB | |
| MOD_0.5_42_TOOTH.STL | 198.7KB | |
| MOD_0.5_45_TOOTH.STL | 211.6KB | |
| MOD_0.5_48_TOOTH.STL | 205.7KB | |
| MOD_0.5_50_TOOTH.STL | 213.6KB | |
| MOD_0.5_52_TOOTH.STL | 221.4KB | |
| MOD_0.5_54_TOOTH.STL | 229.2KB | |
| MOD_0.5_55_TOOTH.STL | 233.1KB | |
| MOD_0.5_56_TOOTH.STL | 237.0KB | |
| MOD_0.5_60_TOOTH.STL | 205.7KB | |
| MOD_0.5_64_TOOTH.STL | 218.2KB | |
| MOD_0.5_65_TOOTH.STL | 221.4KB | |
| MOD_0.5_70_TOOTH.STL | 237.0KB | |
| MOD_0.5_72_TOOTH.STL | 243.2KB | |
| MOD_0.5_75_TOOTH.STL | 252.6KB | |
| MOD_0.5_80_TOOTH.STL | 268.2KB | |
| MOD_0.5_85_TOOTH.STL | 283.9KB | |
| MOD_0.5_90_TOOTH.STL | 299.5KB | |
| MOD_0.5_96_TOOTH.STL | 318.2KB |
