Mobula8 O3 Antenna Mount V1 3D Printer Model
The file 'Mobula8 O3 Antenna Mount V1 3D Printer Model' is (stl) file type, size is 60.5KB.
The file 'Mobula8 O3 Antenna Mount V1 3D Printer Model' is (stl) file type, size is 60.5KB.
I wanted to try using the DJI O3 Antenna that came with my O3. I adapted my Mobula8 O3 Dual Antenna Mount V3,
Print in PLA or TPU.
This antenna mount has a hook (one the top) and screws into the back of the frame (you'll need a slightly longer m2 bolt) so it should last longer. PLA has less need for glue, but TPU may be preferable. For TPU, I used dab of E6000 on each side, as shown in the photo.
I'd recommend printing with Organic Supports. Be careful when removing the supports on the bottom to not rip off the foot that inserts into the original m2 nut recess on the Mob8 frame.
You'll see in the photos where I've mounted my ViFly Finder Mini. This location has worked well for me for quite a few flights. I used a small zip tie to hold it in place.
This print requires pretty tight tolerances, probably..
Feedback welcome.
| Mobula8_O3_40mm_Antenna_Mount_V1.stl | 212.2KB |
![[JENO 5.1″] Support Double Antennes Vista Pour O3 3D Printer Model](https://cdn.3axis.co/assets/84/a3/b3/be/84a3b3be-9bbf-4e68-824e-14f292723636/images/6ce12744-aab6-49c3-835b-655787ae14fa_thumb.jpg)
