Mobile Soldering Station – Quicko T12-942 3D Printer Model
The file 'Mobile Soldering Station – Quicko T12-942 3D Printer Model' is (STL) file type, size is 1.0MB.
The file 'Mobile Soldering Station – Quicko T12-942 3D Printer Model' is (STL) file type, size is 1.0MB.
This is a DIY soldering Station to use anywhere.
I modifyed it a little from my very first version but this version is not on thingiverse!
You need Buegel.stl for both versions, i choosed 4 M3 Screws but this was too much...
You need 4x M2,5 then it fits perfectly.
Gehaeuse_v1.stl is for a 6s2p with many space for your electronic parts.
Gehaeuse_v2.stl is for a 6s1p with space for your electronic parts.
Deckel_v1 is my first version with 4 holders for T12 irons but i can´t use 4 because there ist the 24V plug into the quicko... so i made v2
Deckel_v2 is the new version with only 2 T12 iron holders.
When you put the parts together use 6x 3,5x16/19mm.
A Screw with M5x20 and a washer is to fix the solder.
The switch has about 20mm in the front.
For the Quicko T12-942 you need a little peace of foam on the ground, then the quicko fits perfectly. I used a white 1cm thick foam and marked it black in the front with a Edding.
Pushed it down and fixed it with the Buegel.stl.
More about the electronic you can find in the austrian Forum cnc-aus-holz.at
https://www.cnc-aus-holz.at/index.php?thread/1342-mobile-l%C3%B6tstation/&postID=15072#post15072
Have fun with your new mobile soldering station.
| Buegel_v1_v2.STL | 68.2KB | |
| Deckel_v1.STL | 1.2MB | |
| Deckel_v2.STL | 1.3MB | |
| Gehaeuse_v1.STL | 104.0KB | |
| Gehaeuse_v2.STL | 104.0KB |
