The file 'Mobile Phone Kickstand, Clip, Ring Holder, Protective Cover For Motorola G24 (or Others) 3D Printer Model' is (STL) file type, size is 839.5KB.
I designed a cell phone holder for a Motorola G24 that slides onto the phone with the case on.
The special thing about this holder is that it not only looks cool, but thanks to its thickness of 3 mm, it can also remain on the phone and does not have to be removed!
All switches and connections such as USB connection, speaker connection, volume, on-off are still accessible
You can heat the claws with a hair dryer and thus "set" them more firmly. But this only works with filament that can be bent after heating (not ABS)
The hinge pins are made of 1.75 mm filament. It is recommended to use a well-adjusted printer for this. Otherwise, the holes must be carefully re-drilled with a 2 mm drill.
Caution: the drill must not get hot, otherwise the part will melt and the holes will widen!
To ensure that the holder can fold down again automatically, a rubber band should be attached to the hooks. I cut a piece of bicycle tube to a width of 4 mm and put it around the holder.
Alternatively, you can bend a spring and hook it (see photo)
| aussen.STL | 317.6KB | |
| kralleMOTO.STL | 1.0MB | |
| mitte.STL | 829.1KB | |
| ring.STL | 258.9KB | |
| Stuetze.STL | 74.0KB |
