MNP-275 Quadcopter 3D Printer Model
The file 'MNP-275 Quadcopter 3D Printer Model' is (STL) file type, size is 554.1KB.
The file 'MNP-275 Quadcopter 3D Printer Model' is (STL) file type, size is 554.1KB.
My version of a 275 size quadcopter with foldable arms. you will need some 3mm bolts for the top plate. I use 30mm bolts and nuts with nylon inserts. Each arm needs an additional 2 bolts, 3mm x 20mm. the camera mount has a 1 part and 2 part version. the two part version was used for ninjaflex to keep the camera in.
| arm_pro.STL | 245.0KB | |
| bottom_plate_pro.STL | 267.2KB | |
| canopy.STL | 542.3KB | |
| fpv_cam_brace.STL | 42.6KB | |
| fpv_cam_brace_2_part_pro-insert.STL | 5.6KB | |
| fpv_cam_brace_2_part_pro_main.STL | 30.6KB | |
| middle_plate_pro.STL | 348.9KB | |
| skirt.STL | 24.3KB | |
| support.STL | 14.9KB | |
| top_plate_big_cam.STL | 260.0KB | |
| top_plate_camera__pro.STL | 354.7KB |
