Hello!
This is my custom suspension for Defender MN99s MN90 series.
There are baskets for controller and receiver on the rear and for batteries up to 2200mah (long).
for suspension you will need:
2x spring per wheel (8x for all)
M3 screws + nuts
1x screw M2 + nut per wheel
Optional (there is version with no bearing for print):
4x bearings
| bottom-cover.STL | 206.0KB | |
| front-basket.STL | 193.1KB | |
| rear-basket.STL | 226.2KB | |
| side-cover-holder.STL | 107.4KB | |
| suspension-arm_no_bearing_slot.STL | 294.1KB | |
| suspension-arm_with_bearing_slot.STL | 391.9KB | |
| suspension-holder-front.STL | 198.4KB | |
| suspension-holder-rear.STL | 308.0KB |
