The file 'MN82 Rear Axle Suspension Mounts And Clamps 3D Printer Model' is (stl) file type, size is 276.7KB.
This mount lets you use a common 51-53mm 1/18 scale length shocks as it sits 3mm lower than the stock mount (stock shock is 47mm), more robust than using the plastic ball joint and putting a screw into it.
Should be compatible with both plastic and metal axles.
Also have modeled the clamps as mine were easily stripped.
Printed with HP MJF PA12 Nylon
With FDM, clamps should print fine without support but the mounts will require them.
MN82_rear_axle_clamp_8x_connected.stl | 666.7KB | |
MN82_rear_axle_clamp_single.stl | 66.7KB | |
MN82_rear_axle_clamp_V4_driver.stl | 135.1KB | |
MN82_rear_axle_clamp_V4_pairs_connected.stl | 296.5KB | |
MN82_rear_axle_clamp_V4_passenger.stl | 135.0KB |