MMU2 Frame Holder For Bear Full Upgrade 3D Printer Model
The file 'MMU2 Frame Holder For Bear Full Upgrade 3D Printer Model' is (f3d,step,stl) file type, size is 471.7KB.
The file 'MMU2 Frame Holder For Bear Full Upgrade 3D Printer Model' is (f3d,step,stl) file type, size is 471.7KB.
MMU2 and MMU2S frame holder for my Bear Upgrade.
This MMU2(S) frame holder is compatible with both MMU2 and MMU2S
| Part | Quantity | Example |
|---|---|---|
| M5x10mm button head screw (ISO 7380) | 2 | |
| Drop-in tee-nuts M5 | 2 | Openbuilds |
/! Warning: The parts have been designed and tested with the parameters below and it is important to follow them to avoid issues like part cracking, bad bridging, not enough stiffness or wrong tolerances. Be sure to have a well calibrated machine and extruder. Check our guide here for calibrating extrusion multiplier
− Slicer : PrusaSlicer recommended
− Infill type : Gyroid recommended
− Support : No
− Brim : No
− Detect thin walls : No
− Perimeters width (internal and external) : 0.45mm
| Layer Height | Infill | Perimeters | Top/Bottom Layers |
|---|---|---|---|
| 0.20mm | 20% | 3-4 | 5 |
2020.05.18 : set angle to 40° to help steel ball
| mmu2_frame_holder.f3d | 330.2KB | |
| mmu2_frame_holder.step | 275.7KB | |
| mmu2_frame_holder.stl | 785.0KB |
