MK8 I3 – 50mm Radial Circular Fan Shroud 3D Printer Model
The file 'MK8 I3 – 50mm Radial Circular Fan Shroud 3D Printer Model' is (stl) file type, size is 75.6KB.
The file 'MK8 I3 – 50mm Radial Circular Fan Shroud 3D Printer Model' is (stl) file type, size is 75.6KB.
I've designed a fan shroud for a 50mm radial fan for the metal carrier of the GEEETech i3 model printers.
There are 3 models included,
1; The standard model for the metal carrier with MK8 extruder and hot-end.
2; A model designed with a ring holder for a 12mm auto bed level sensor.
3; A model designed with a ring holder for a 12mm auto bed level sensor.
I've printed the standard model and the 18mm sensor model myself both with 50mm/s with a 0.2mm layer height and a 15% infill.
The fan does not need an actual mount to hold the fan.
For the inductive sensor you can use these settings in Marlin for the bed leveling(actual settings may very depending on machine setup);
[12mm sensor]
X-Offset = -21
Y-Offset = -44
[18mm sensor]
X-Offset = -25
Y-Offset = -45
[18mm sensor V2]
X-Offset = -25
Y-Offset = -35
The Z-Offset depends on the mounting height of your sensor on the mount.
Mine is -1.0
V2
I have looked over my design and moves the sensor holder more towards the nozzle, from 45mm to 35mm offset.
Also some minor tweaks give it a slightly better airflow and more clearance at the bottom so it does not touch the binder clips anymore!
Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you:
https://www.etsy.com/shop/XDr4g0nX3DPrinting
| 50mm_Radial_Circular_Fan_Shroud.stl | 203.0KB | |
| 50mm_Radial_Circular_Fan_Shroud_-_Bed_Level12mm.stl | 276.0KB | |
| 50mm_Radial_Circular_Fan_Shroud_-_Bed_Level18mm.stl | 280.2KB | |
| 50mm_Radial_Circular_Fan_Shroud_-_Bed_Level18mm_V2.stl | 296.5KB |
