A cover for the Bigtreetech TFT35-V3 grafic touch display, suitable for the Prusa MK3 / S / + and BEAR 3D printer using a Bigtreetech mainboard, according to the Bigtreetech drawing.
https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/tree/master/Hardware
This is a remix (correction and extension) of a similar thing found on the Prusa page.
https://www.prusaprinters.org/prints/22318-btt-tft35-v30-lcd-cover-for-mk3s-bear
A support is included for fastening. Screws and nuts are still needed, depending on the 3D printer.
MK3:
1 x M3 x 10 screw
2 x screw M3 x 14
1 x M3 x 25 screw
4 x hexagon nut M3
BEAR (v-slot frame):
3 x M3 x 10 screw
1 x M3 x 16 screw
The reset button is protected against accidental activation with a small rounded nipple.
The included round nut attaches the encoder from the outside of the housing.
After printing, remove the 4 small predefined support bars from the cover.
I hope you like it. Feel free to get in touch in the comments.
| bear_btt_tft35-v3_support_L_v1.0.stl | 175.6KB | |
| bear_btt_tft35-v3_support_R_v1.0.stl | 149.2KB | |
| btt_tft35-v3_cover-nut_v1.0_metric.stl | 543.8KB | |
| btt_tft35-v3_cover_v1.0.stl | 629.6KB | |
| btt_tft35-v3_rstbutton_v1.0.stl | 79.8KB | |
| prusa_btt_tft35-v3_support_l_v1.0.stl | 196.4KB | |
| prusa_btt_tft35-v3_support_r_v1.0.stl | 173.6KB |
