MJX Bugs 6 B6 B8 Upgrade Kit 3D Printer Model
The file 'MJX Bugs 6 B6 B8 Upgrade Kit 3D Printer Model' is (stl,step) file type, size is 742.6KB.
The file 'MJX Bugs 6 B6 B8 Upgrade Kit 3D Printer Model' is (stl,step) file type, size is 742.6KB.
This kit allows you to mount modern (as of 2024) components on the MJX Bugs 6 or Bugs 8 frame, without any modification of the frame.
Example flight footage of a Bugs 6 upgraded using these prints:
Apart from the Battery case, all parts can be printed as-is.
Recommended printing materials are included in each file name. I used Eryone TPU 95A and Eryone PLA+.
The provided "Battery case" STL file is made specifically for the GepRC 660mAh 4S LiHV battery. If you happen to have this battery, all you need to do is add a few thin (~5mm) strips of 2mm thick adhesive foam on the inside for padding.
For all other batteries, (smaller than 80mm x 38mm x 18mm) use the STEP file "Battery case solid", and carve out the necessary size. Make sure to leave ~1mm room for foam padding to avoid damaging your LiPos.
For the Flight Controller, toothpick-style AIOs are recommended for the vertical USB port.
To complete the motor adapter, you'll require M2 insert nuts 3mm tall and 3.5mm outer diameter.
Update 17/Mar/2024:
| Battery_case_450mAh_4S_PLA+.stl | 487.5KB | |
| Battery_case_660mAh_4S_PLA+.stl | 487.0KB | |
| Battery_case_solid.step | 268.4KB | |
| Camera_mount_L_TPU.stl | 205.7KB | |
| FC_Mount_25x25_PLA+.stl | 188.6KB | |
| FPV_antenna_holder_TPU.stl | 116.8KB | |
| LED_lens_TPU_trans.stl | 501.6KB | |
| Motor_adapter_16mm_to_12mm_PLA+.stl | 186.9KB | |
| Motor_wire_cover_PLA+.stl | 156.3KB | |
| RX+VTX_mount_AIO_TPU.stl | 81.3KB |
