This is a hard case for the Miyoo Mini Plus based on the Game Boy I had as a kid.
There are two file versions for the top half: FaceUp is for printing with the text on top. This gives a cleaner surface and easier to do the filament change, but requires lots of supports and the text is a bit janky. I've settled on this version.
FaceDown is for printing with the text against the build plate. 4 layers @ 0.2mm / layer allows 2 layers of support for the rest of the face (enough that it can be peeled off). This gives clean text, but a rough surface. Recommend changing colours 1 layer before the transition so it has time to clear out the black.
There's a small storage spot inside for an emergency charger or earbuds.
The hinge uses a 1.75mm filament.
Printing at 100% is a snug fit. I printed at 101% scale to make space for the lining.
I lined the inside with scrap denim using double sided tape to stick it in place (stick tape to denim first then cut out denim along tape to reduce fraying and ensure it sticks all the way to the edge).
| GameBoy_Miyoo_Mini_Plus_Case_Back_Rev2.stl | 502.8KB | |
| GameBoy_Miyoo_Mini_Plus_Case_Top_FaceDown.stl | 560.6KB | |
| GameBoy_Miyoo_Mini_Plus_Case_Top_FaceUp.stl | 561.0KB |
