Mitsubish Outlander Bottom Tailgate Release Blocker 3D Printer Model
The file 'Mitsubish Outlander Bottom Tailgate Release Blocker 3D Printer Model' is (stl) file type, size is 12.2KB.
The file 'Mitsubish Outlander Bottom Tailgate Release Blocker 3D Printer Model' is (stl) file type, size is 12.2KB.
If you have a removable towbar fitted on your Outlander (or Peugeot equivelant) then you've likely almost opened the lower tailgate onto it by mistake, which you'll know is not a good idea.
I've designed this to place into the latch release when the towbar is fitted so that you can't open the lower tailgate, and as a reminder you have the towbar fitted.
I remove it when I take off the towbar, and put it in the bag along with it.
I'd recommend printing in PETG if you want it to stand up to the summer heat in your car.
| Outlander_Boot_Blocker.stl | 54.4KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
