Mistfall And Heart Of The Mists – Insert 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:1.1MB

The file 'Mistfall And Heart Of The Mists – Insert 3D Printer Model' is (stl) file type, size is 1.1MB.

Summary

Removable inserts for combining Mistfall and Heart of the Mists into a single box. It also stores the Kickstarter expansions, promos, Sand and Snow and Valskyrr campaign expansion. It supports premium thickness sleeved cards (200 micron).

Note that there is about 20mm of lid lift, as there really isn't enough space to accomodate it all.

There are 16 character/charter boards in total when you combing Mistfall and Heart of the Mists. The character board trays in the base of the box only support 15 boards. One of the boards sits vertically, parallel to the location tile trays. I use the Mistfall Time board for this, as it's no longer used in the Heart of the Mists rules.

BoardsTray.stl 153.0KB
CardTray1_x2.stl 845.2KB
CardTray2.stl 667.1KB
LocationsTray1.stl 645.6KB
LocationsTray2.stl 383.7KB
TokensTray1_x4.stl 1.2MB
TokensTray2.stl 308.5KB
TokensTray3.stl 458.5KB