Mission Santa Clara De Asis 3D Printer Model
The file 'Mission Santa Clara De Asis 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Mission Santa Clara De Asis 3D Printer Model' is (stl) file type, size is 1.6MB.
My son was assigned to build a California Mission for his 3rd grade history class. This mission is not to scale. Its more of a representation.
Things to consider before printing:
This comes together like that of a plastic model kit. So you'll need a couple of tubes of CA glue. When gluing, clamping of parts are necessary. I used clothes pin hangers, binder clips, and paperclips as clamping tools. For gluing walls together at right angles, I designed an "L" bracket for bracing of the joints. Print as many of those as needed. Refer to the pictures, and assembly model when putting this model together.
To pay it forward, PLEASE post your makes. Also PLEASE post any remixes that may improve this design to benefit anyone needing to build this mission for school. Thank you!
More info on the Santa Clara De Asis Mission can be found here:
https://www.scu.edu/missionchurch/
| Assembly_Model__Mission_Santa_Clara_De_Asis.stl | 3.6MB | |
| back_left.stl | 2.6KB | |
| back_of_main.stl | 15.8KB | |
| Back_right.stl | 3.0KB | |
| big_cross.stl | 3.8KB | |
| box_1.stl | 19.6KB | |
| box_2.stl | 2.2KB | |
| cross_base.stl | 2.0KB | |
| far_left_roof.stl | 135.3KB | |
| far_left_wall.stl | 6.7KB | |
| far_right_roof.stl | 184.2KB | |
| far_right_wall.stl | 17.6KB | |
| fa_right_door.stl | 7.6KB | |
| front_crosses.stl | 2.2KB | |
| inside_angle_joiner.stl | 1.1KB | |
| left_wall.stl | 12.1KB | |
| Mary.stl | 70.2KB | |
| middle_door.stl | 6.6KB | |
| middle_frnt.stl | 501.3KB | |
| middle_stairs.stl | 6.6KB | |
| mission_statue_1.stl | 148.7KB | |
| mission_statue_2.stl | 36.6KB | |
| plaque.stl | 1.0MB | |
| right_fence.stl | 56.3KB | |
| right_main_roof.stl | 329.2KB | |
| right_main_roofMirror.stl | 328.8KB | |
| right_stairs.stl | 4.0KB | |
| right_wall.stl | 10.5KB | |
| Rt_Face.stl | 33.0KB | |
| tower_door.stl | 8.6KB | |
| tree_pot.stl | 1.4KB | |
| turret.stl | 7.5KB | |
| turret2.stl | 34.8KB | |
| turret3.stl | 53.4KB | |
| turret_cage.stl | 142.5KB | |
| turret_cage_2.stl | 47.5KB | |
| turret_cross.stl | 27.2KB | |
| turret_stairs.stl | 3.7KB | |
| turret_top_1.stl | 3.5KB | |
| turret_top_2.stl | 4.0KB |
