Received an old and fubar camera therefore it was a must to recover the lens and test if it was possible to make it work on a Sony E camera, one week and a lot of teste finally is working tha adaptor part is not clicking perfect but works fine to take pictures, i gess that any lens between 28 to 17mm could be a candidate to adapt and play. Easy to print, no supports glued all parts with clear silicone (UHU works for me) printed the outer walls in fuzzy of the lesn cap to make it easier to focus, the original lens was a 35mm 4.5. The cup and the shade will be modded to soon to be as good as possible.
Took the good work from Diyowl for the 45mm sony lens and it was too loose, so modded all the parts to print perfect with no gaps or wobble in the focus ring, and thats all, if you have an old camera or lens to be modded send it to me and ill be glad to try to make it work. I gess there are a lot of adaptors online, it was from my father in law it must remain working in the family.
It will work with any lens, dowload it and make the hole for the lens big or small to make it fit you will be amazed how good the pisctures result.
The lens came from here http://camera-wiki.org/wiki/Minolta_FS-35
| cap.stl | 486.8KB | |
| E_mount_base.stl | 143.0KB | |
| Lens_part.stl | 226.7KB | |
| Sunshade.stl | 32.9KB | |
| thread.stl | 235.2KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
