The file 'MiniQuad 3.7 3D Printer Model' is (txt,stl,skp,ini) file type, size is 973.9KB.
I want to build a little quadcopter for indoor and outdoor use. I was interesting by these models:
MXQ_105_Micro_FPV_Quad for the flight controler support http://www.thingiverse.com/thing:1594735
and this one for the frame and the anti-vibration dampers
FireFlo v3
http://www.thingiverse.com/thing:1152714
So, I decide to draw my design combining what I like in these two designs.
It fly quite good. Now I have to work my driving.
I use Micro scisky flight controler and 8.5 brushed motors and 750 mAh battery.
The frame is about 10-11g with dampers.
The miniquad total weight is 64.5g with battery.
I probably will change for 500 mAh to increase flying time and decrease weight. I hope to obtain about 60g.
I also will change JST plug on the scisky for walkera plug.
The diagonal dimension is 110mm.
The transmitter is a Devo 7E flash with deviation 5.0 compatible with DSM2 scisky inboard protocol.
I choose a combo for FPV:
FX797T for cam and F408 for receiver.
I put model1.ini for devo 7E transmitter and the original dump profile for cleanflight.
MiniQuad-3.7.1up.stl is a reinforce version.
I also change propeller and increase flying time (about 5mn).
| Dump_profile_1.txt | 7.3KB | |
| MiniQuad-3.7.1up.stl | 1.7MB | |
| MiniQuad-3.7.1_.skp | 1.6MB | |
| MiniQuad-3.7down.stl | 1.2MB | |
| model1.ini | 8.0KB |
