12gr | stock hardware
With the existent hardware, this dual duct mount is intended to replace the stock one, improve part cooling, air flow...
Easy to print, mount and do some maintenance ;)
Remix based on this amazing design "Mini-Me v4 lightweight Ender3 Hotend Duct..." - https://www.thingiverse.com/thing:4375296
After a lot of tries with different designs... I decided to make this one, with some improvements:
MinionD Ender 3 dual duct air flow test:
https://youtu.be/2JOf3tFQ6s4
Included are some cut stl´s of v2 fixed and v3 for printing to check fitting, before printing the actual mount.
26/01/2022 - 5015 version is live :)
07/01/2022 - As requested - 5015 version
Note that i´ve not tested!!!
Stl in the section bellow.
08/06/2021 - Ender 3 v2 ABL + BLTouch mounts
17/05/2021 - Velocity Stack
Updates and fixes based on comments and suggestions, thanks ;)
19/04/2021 - v3 pressFit
19/04/2021 - v3
19/04/2021 - v2 fixed & adjustable
10/04/2021 - vanes version + step
08/04/2021 - BLTouch mount
07/04/2021 - ABL mount
18mm inductive sensor
» discord: https://discord.gg/k3GvDAgNEb
Remix based on this amazing design "Mini-Me v4 lightweight Ender3 Hotend Duct..." - https://www.thingiverse.com/thing:4375296
| MinionD.step | 3.5MB | |
| MinionD.stl | 8.4MB | |
| MinionD_ABL_mount.stl | 113.2KB | |
| MinionD_bltouch_mount.stl | 73.4KB | |
| MinionD_v2fixed_adjustable.stl | 9.4MB | |
| MinionD_v2fixed_adj_cut.stl | 516.5KB | |
| MinionD_v2_vanes.stl | 9.2MB | |
| MinionD_v3.step | 4.3MB | |
| MinionD_v3.stl | 9.6MB | |
| MinionD_v3_pressFit.stl | 9.3MB | |
| MinionD_v3_pressFit_cut.stl | 516.5KB |
