A minimalist bracket to help mount the HackRF ONE. I use mine like pictured, but also works in the vertical orientation.
The screw holes are 3.6 mm diameter with 7 mm diameter x 2.5 mm deep counter bore for the screw cap. I made sure to leave clearance with front lip so you can access the screws with a long screw driver while the radio is installed.
I recommend printing in the orientation pictured. Do not worry about adding supports for the lips that clips around the radio case. The bracket thickness is intentionally thin to allow it to bend around the radio before locking in place. I recommend using 2 mm wall + top/bottom skin thickness with 5% infill to give the compliant effect.
| HackRF_wall_mount-Body.stl | 227.2KB |
