Want to add texture to your game but don't want to waste countless hours and endless spools of plastic printing hundreds of tiles? Short on storage space for those hundreds of tiles once they're printed? These tiles take almost no plastic at all, print quickly and stack almost like paper when you're not using them!
Feel free to suggest other tiles for me to add :)
Edit: Added walls that print upside down so you don't need to use supports. The small ridge on the bottom should pop into the lines between the 1" squares as seen in the picture.
Edit: By request added in 4X4 space station flooring. Let me know if you'd like any specific sizes of this.
Edit: By request added in rounded corners and sides to make an 18inch circle of stone floor. You just need to print 4 of the corners, 4 of the sides and 1 of the 6X6 stone floors and you'll be good to go!
Edit: By request added in 2x3 and 1x3 for wood, stone and rock tiles
| 18inch_Circle_Corner_Stone_Floor.stl | 2.1MB | |
| 18inch_Circle_Side_Stone_Floor.stl | 3.5MB | |
| 1X3_Minimal_Rock_Tile.stl | 83.8KB | |
| 1X3_Minimal_Stone_Tile.stl | 257.7KB | |
| 1X3_Minimal_Wood_Floor.stl | 80.7KB | |
| 2X2_minimal_stone_floor.stl | 424.4KB | |
| 2X2_minimal_wood_floor.stl | 143.4KB | |
| 2X3_Minimal_Rock_Tile.stl | 129.0KB | |
| 2X3_Minimal_Stone_Tile.stl | 587.0KB | |
| 2X3_Minimal_Wood_Floor.stl | 213.9KB | |
| 3X3_minimal_stone_floor.stl | 951.7KB | |
| 3X3_minimal_wood_floor.stl | 276.6KB | |
| 4X4_Minimal_Rock_Floor.stl | 1.4MB | |
| 4X4_minimal_space_floor.stl | 3.7MB | |
| 4X4_minimal_stone_floor.stl | 1.7MB | |
| 4X4_minimal_wood_floor.stl | 571.0KB | |
| 5X5_minimal_stone_floor.stl | 2.8MB | |
| 5X5_minimal_wood_floor.stl | 812.8KB | |
| 6X6_minimal_stone_floor.stl | 3.6MB | |
| Minimal_Wall_Metal.stl | 328.6KB | |
| Minimal_Wall_Metal_Straight.stl | 244.4KB | |
| Minimal_Wall_Stone.stl | 1.0MB | |
| Minimil_Road_4X4_Curve.stl | 63.9KB | |
| Minimil_Road_4X4_Straight.stl | 21.9KB |
