I remixed my original model to be as minimal as possible. This is a wall mount that's been designed for the Nexus 10, but it should fit most tablets < 9mm thick. You should be able to print the model as it is oriented without supports. You can get away with just two corners if you do one at the bottom, and the other diagonally at the top.
I have included two optional corners that have a cut out, one left and one right, to allow access to buttons near the corner. Should work for Nexus and iPads.
| Minimal_Tablet_Wall_Mount.stl | 54.3KB | |
| Minimal_Tablet_Wall_Mount_-_Left_Cutout.stl | 61.3KB | |
| Minimal_Tablet_Wall_Mount_-_Right_Cutout.stl | 61.3KB |
