Minimal Coin Cell Battery Holders 3D Printer Model
The file 'Minimal Coin Cell Battery Holders 3D Printer Model' is (stl) file type, size is 39.0KB.
The file 'Minimal Coin Cell Battery Holders 3D Printer Model' is (stl) file type, size is 39.0KB.
Simple, minimal holders for coin cell batteries of various sizes. Prints very quickly and takes up the minimum amount of space, while still giving the smaller negative terminal some protection. Batteries snap in and out easily, as long as your printer is calibrated properly.
If your printer isn't calibrated properly and producing dimensionally accurate prints, it's not the fault of the model. You might be able to scale to account for any printer inaccuracies.
These are super handy to keep in my travel toolbox as there are many digital gauges out there - pressure gauges, calipers, etc - and not being able to set your stuff up because your battery died and you don't have a replacement isn't very pro.
Uploading 3 battery holders for various batteries but the original is parametric, so if you have interest in other battery sizes or counts, contact me.
| CR1632_battery_holder.stl | 44.2KB | |
| CR2016_battery_holder.stl | 44.2KB | |
| CR2025_battery_holder.stl | 44.2KB | |
| CR2032_battery_holder.stl | 42.7KB | |
| LR44_battery_holder.stl | 41.9KB |
