Minimü DIY Anime Doll 3D Printer Model
The file 'Minimü DIY Anime Doll 3D Printer Model' is (stl,obj,mix) file type, size is 74.9MB.
The file 'Minimü DIY Anime Doll 3D Printer Model' is (stl,obj,mix) file type, size is 74.9MB.
Consider this a major upgrade to my MiniMusume body!
Designed for customization, you will need Mesh Mixer to pull individual STLs to print as-is. This version allows for screw joints (I use 3/16" 1-72 ), removeable faceplates, and overall more refined proportions.
You will need:
4x 3/16" 1-72 screws
A pin vice with a 1.75mm,a 2mm, and a 3mm bit
5 copies of the doubleball joint
The tolerance between the head parts and all the peg holes is .0015mm, the tolerance between the balljoints and the sockets is .005". I have printed these parts with my Form 2 but you should be able to print on an FDM printer with some additional sanding at the .0015" connections.
The back and holdyhands support 3mm pegs.
| Blank_Parts.stl | 61.3MB | |
| Raw_Female_Body.obj | 8.7MB | |
| Raw_Grippy_Left_Hand.obj | 5.3MB | |
| Raw_Head_Assembly.obj | 30.3MB | |
| Raw_Left_Arm.obj | 16.5MB | |
| Raw_Left_Leg_Flat.obj | 11.6MB | |
| Raw_Male_Body.obj | 8.5MB | |
| Template.mix | 66.0MB |
