This is a 28mm waterwheel with a rotating pivot that rotates the waterwheel and fills the brick water storage. Removing the wood trap will allow water to flow to the water buckets. The rotation of the small wheel will rotate the water wheel with 6 buckets and fill the wood trough that then uses gravity to have water flow into the brick storage bin. The water wheel does rotate and you can actually place water into the well and then rotate the wheel with your finger and fill up the brick storage.
Note: Some assembly required, meaning some supergluing of components is required. This is especially true for the smaller rotating wheel assembly and the buckets to the main wheel.
| add_ons.stl | 25.7MB | |
| Pivots.stl | 8.6MB | |
| Sprocket.stl | 3.6MB | |
| Stone_Wells.stl | 22.8MB | |
| Turn_Stile.stl | 5.5MB | |
| water_wheel_turn.stl | 10.9MB | |
| Wood_trough.stl | 8.1MB |
