Miniature Version Of A Real Existing House 3D Printer Model
The file 'Miniature Version Of A Real Existing House 3D Printer Model' is (stl) file type, size is 2.2 MB.
The file 'Miniature Version Of A Real Existing House 3D Printer Model' is (stl) file type, size is 2.2 MB.
This thing was a christmas present for my parents: My childhood home in 3D!
It was hard work to come from the sketch to the printed miniature version of the house.
The final result consists of 11 parts. It was designed with openSCAD.
One can easy look at each floor separately.
All parts are resized to ~1/65 scale to make them printable on my reprap mendel.
The parts wese printed of PLA with a slice thickness of 0.2 mm.
The complete prining time was about 65 h.
To make sure the roof will not brake away from the printbed, I glued it with a hot-melt gun - easy to remove from PLA and from the printbed, but sticky enough for that purpose.
Hope you have fun with it - my parents had!
For more information look here: www.ifeelbeta.de
Greetings
BonsaiBrain
| floor1-part1-extra-small.stl |
| floor1-part2-extra-small.stl |
| floor1-part3-extra-small.stl |
| floor1-part4-extra-small.stl |
| floor2-part1-extra-small.stl |
| floor2-part2-extra-small.stl |
| floor2-part3-extra-small.stl |
| floor3-part1-extra-small.stl |
| floor3-part2-extra_small.stl |
| roof-part1-extra-small.stl |
| roof-part2-extra-small.stl |
