Miniature Storage Shelves 3D Printer Model
The file 'Miniature Storage Shelves 3D Printer Model' is (stl) file type, size is 202.9KB.
The file 'Miniature Storage Shelves 3D Printer Model' is (stl) file type, size is 202.9KB.
These shelves are a set of modular shelf and tray units to store miniatures. The sub trays have slots for 15 25mm, 10 32mm, or 5 40mm bases to slot into. Those trays then slide into the main tray which can be stacked on the shelves. The shelves themselves slot together with the provided pegs and can stack both upwards and sideways.
The shelf prints are large, so a fairly large bed is needed. Due to how the slots work, the main trays work best printed standing up. There are two tray versions: one with holes for less plastic/time if you are for sure using the sub trays and one without that you can directly stack larger miniatures on.
The 25mm subtray with the lines through it was made to accommodate the new infinity bases with facing arrows on the side.
I'm going to continue adding subtrays as I make them. The next will probably be for Marvel Criris Protocol bases.
UPDATE: Added a 28.5x12 mm tray that works for Legion, new GW bases, and Conquest.
Also added a hex version for battletech, a 2 x 60 tray, and a flat tray with a lip
UPDATE: Added a version for ASoIaF here (https://www.thingiverse.com/thing:6053614)
UPDATE: Added a double tray of 40mm
| 10x32.stl | 127.9KB | |
| 15x25.stl | 189.0KB | |
| 15x25infinity.stl | 154.8KB | |
| 16mmpeg.stl | 684.0B | |
| 285mm.stl | 151.4KB | |
| 28mmpeg.stl | 684.0B | |
| 2x60tray.stl | 25.9KB | |
| 5x40.stl | 63.5KB | |
| 5x60x35oval.stl | 64.1KB | |
| 60mmpeg.stl | 684.0B | |
| 80mmPeg.stl | 684.0B | |
| 8x35MCP.stl | 101.7KB | |
| 9hex.stl | 11.4KB | |
| Double40.stl | 164.0KB | |
| FlatTray.stl | 1.4KB | |
| Shelf.stl | 10.4KB | |
| TrayBottom.stl | 2.2KB | |
| TrayBottomWithHoles.stl | 10.1KB |
