Miniature Standard-Lamp Lithophane 3D Printer Model Free Download

Description Files (14)

Summary

Here comes my lithophane miniature lamp!

This one is designed to attach a switch and a light source. In case you want it without the switch let me know in the comments.

Instructions:

Use the attached JPEG as an original for the correct dimensions of the lithophane.
Change the image to whatever you like (keep the format!)
Go to http://3dp.rocks/lithophane/
Upload your image
Select "Outer Curve"
Go to settings > Model settings > Maximum size (MM) > Set it to 300 mm
Go to settings > Model settings > Curve > Set it to 360
In case you did not upload a negative image: Go to settings > Image settings > positive image
Click "Model" on top of the page
Hit "Refresh" button
Hit "Download" button to download and print your personal lithophane

Printing:

Selecting the light source:

Take the "adapter_piece" File (Sldprt or STL) and modifiy it so you can attach your own light source.
The adapter piece is designed to fit on the 3 holes on top of the litho_mount-plate
you can use the abatements to drill your own holes in the adapter piece

Switch:

adapter_piece.sldprt	108.0KB
adapter_piece_customizable.STL	53.1KB
adapter_piece_hot-glue.STL	810.9KB
bottom_plate.STL	194.2KB
foot_V1.STL	4.6MB
Foot_V1_noSwitch.STL	1.0MB
lithophane_image_original.zip	19.3KB
Lithophane_sample_clear.STL	63.8KB
Lithophane_sample_landscape.stl	30.1MB
litho_mount-plate_V1.STL	593.8KB
Top_Plate_02.STL	3.8MB
top_plate_V1.STL	4.0MB
top_plate_V2_less_supports.STL	3.8MB
top_sphere_V1.STL	2.3MB