Miniature Laptop Insert For Hinged Mini Pelican Case 2.0 3D Printer Model
The file 'Miniature Laptop Insert For Hinged Mini Pelican Case 2.0 3D Printer Model' is (stl,step) file type, size is 724.2KB.
The file 'Miniature Laptop Insert For Hinged Mini Pelican Case 2.0 3D Printer Model' is (stl,step) file type, size is 724.2KB.
A Miniature Laptop insert for the Hinged Mini Pelican Case.
Files for the normal sized case are labeled "PelicanCase_v3".
Files for the mini sized case are labeled "PelicanCase-mini_v3".
The keys are used for the both of them.
The Bezel and Main body should pressure fit into the pelican case but the keys and touchpad needs to be glued into their slots.
The display can fit a 26x33mm picture for the normal version and a 22x33mm picture for the smaller version but I just used blue pieces of paper. You can also optionally make a 10mm wide strip of paper or thin plastic and slide it into the gaps in the bezel and main body to make a fake display cable.
Refer to the attached images for assembly and STEP files are also available if you want to adjust the fit or modify it.
Keyboard is from www.thingiverse.com/thing:3696285.
| Bezel_PelicanCase-mini_v3.stl | 3.2KB | |
| Bezel_PelicanCase_v3.stl | 3.2KB | |
| Keys_PelicanCase_v3_PelicanCase-mini_v3.stl | 29.4KB | |
| Main_Body_PelicanCase-mini_v3.stl | 5.4KB | |
| Main_Body_PelicanCase_v3.stl | 5.0KB | |
| PelicanCase-mini_v3_Computer_Insert.step | 2.2MB | |
| PelicanCase_v3_Computer_Insert.step | 1.9MB | |
| Touchpad_PelicanCase-mini_v3.stl | 684.0B | |
| Touchpad_PelicanCase_v3.stl | 1.4KB |
