2 inch Whopper Plopper printed in one piece.
https://www.youtube.com/watch?v=BN4lebKy4Ho
https://www.youtube.com/watch?v=SYYGoLM_nEQ
Update 21.03.19
I uploaded a bigger 10cm long version, because when you just upscale the small version it gets a bit tail heavy. So i changed the air chamber for the bigger version. Upscale the Propeller to 180% for the bigger version.
Material used:
0.5 - 0.6mm wire (please use strong spring wire, don´t use soft wire!)
M1 Screws (https://tinyurl.com/y7khpsse)
4mm eyes
1 pearl
Print settings:
100% infill
big Brim!
2 outer walls
0.2mm layer height for body and 0.1mm for propeller
no support!
Print orientation like on pic 4!
For build instructions scroll down!
If you want to support me, check out my other lures i sell:
https://cults3d.com/en/3d-model/gadget/crankbait-fishing-lure-domi1988
https://cults3d.com/en/3d-model/gadget/fat-crankbait-easy-to-print-and-build-one-piece-print
https://cults3d.com/en/3d-model/gadget/4-piece-swimbait-fishing-lure-14cm-easy-print-and-build
| Whopper1.stl | 3.0MB | |
| Whopper1_bigger.stl | 3.0MB | |
| Whopper2.stl | 1.2MB |
