Mini Vice 3D Printer Model Free Download

Description Files (10)

Summary

My First 3d Project

Maximum jaw opening is ~35mm

Some of the parts could have been simplified(captive assembly) but i'm very happy with how it looks and that's what really matters to me!

The C Washer, Moving Jaw Screw and Handle Ball will need to be printed twice.

Assembly is straight forward:

Place the moving nut in the body with screw holes facing through the top of the body
screw captive screw through the hole in the front of the vice and through the moving nut
Place one c washer in the slot and push around the channel in the captive screw until you can see both ends
Place the other c washer in the slot to fully surround the captive screw and then push the clip in behind it pushing from either side until fully seated
Screw in moving jaw using the two moving jaw screws with the shim between the moving jaw and nut(you may need to scale the z height of the shim to achieve a nice fit)

Vice_Body.stl	225.3KB
Vice_Captive_Assembly_Clip.stl	92.9KB
Vice_Captive_Screw.stl	4.4MB
Vice_C_Washer.stl	73.1KB
Vice_HandleBall.stl	1.2MB
Vice_HandleBar.stl	118.1KB
Vice_Moving_Jaw.stl	54.6KB
Vice_Moving_Jaw_Screw.stl	1.7MB
Vice_Moving_Nut.stl	4.6MB
Vice_Moving_Nut_Shim.stl	82.3KB