Mini Treasure Chest – Simple Print & Build! 3D Printer Model
The file 'Mini Treasure Chest – Simple Print & Build! 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Mini Treasure Chest – Simple Print & Build! 3D Printer Model' is (stl) file type, size is 1.2MB.
A tiny treasure chest that prints and assembles easily. The one I printed even opens with a very satisfying creak. It can be used for all sorts of things - storing salt flakes in the kitchen, herbs, jewellery, small coins, or even (100% definitely real) gold ingots.
Bonus points for printing this in wood effect filament!
This was intended to be buried in the ground, so has a small lip around the edge that might help prevent water getting in, but it's by no means waterproof.
Instructions:
Print without supports, and use a piece of filament for the hinge pin.
If you make the version with the magnetic closure, it will need to have 4pcs OD3mmxL4mm cylindrical magnets glued into the holes. Make sure to get the orientation right!
| Miniature_Treasure_Chest_Box.stl | 585.6KB | |
| Miniature_Treasure_Chest_Lid.stl | 2.1MB | |
| Miniature_Treasure_Chest_Magnet_Box.stl | 873.4KB | |
| Miniature_Treasure_Chest_Magnet_Lid.stl | 2.4MB |
