Need to get:
18x bolts m1 8mm (for wheels)
3x bolts m2 8mm (for engine compartment)
4x bolts m2 4mm (for wheel holder)
6x bearings 3x8x4 mm
2x bolts m3 10mm (for front wheels)
4x bolts m3 8mm (for medium wheels)
2x springs ~5x25mm (for shock absorption)
1x cylinder 3x62mm (holder for driving wheels, you can get the rail from the dvd drives)
1x 4-channel radio control board (from ali - https://aliexpress.ru/item/4000515706502.html
p.s. without antenna works only up to 2 meters )
1x battery 3v-5v ~20x40x15x mm (in tank)
1x any battery 3v-5v (for remote control)
2x mini gear motor, 100+ rpm 6v GA12-N20 (from ali - https://aliexpress.ru/item/1005003480074662.html )
Need to print:
1x Body
4x WheelInside
4x WheelOutside
2x FrontWheelInside
2x FrontWheelOutside
2x GearWheel
2x MotorGear
2x WheelHolder
2x WheelHolderMirror
2Ñ… TrackLent (TPU)
| Body.stl | 172.1KB | |
| FrontWheelInside.stl | 63.6KB | |
| FrontWheelOutside.stl | 86.1KB | |
| GearWheel.stl | 333.2KB | |
| miniTank.max | 139.3MB | |
| MotorGear.stl | 281.9KB | |
| TrackLent.stl | 134.8KB | |
| WheelHolder.stl | 44.8KB | |
| WheelHolderMirror.stl | 44.8KB | |
| WheelInside.stl | 53.8KB | |
| WheelOutside.stl | 60.9KB |
