A tiny table fountain I made in Tinkercad for a small 3W 230VAC or 5V USB- submersible water pump, available on online portals. I recommend the 5V USB pump due safety reasons.
For water proofness please coat the basin by painting inside. I tried different printer settings, but all of them leak after a while.
I also printed the fountain with my UV-resin printer, which works well and absolutely w/o leak.
Print the lid in a scale of 99,0% for fitting the base easy.
The tap is designed to be assembled direct on the pump outlet, I attach additional tube, if measure of adaptor is too short.
Print the tap with support but without inner support and with rafts.
The lid and the basin is a simple print.
NEW (NOV 2021) a 2nd version of a smaller basin and the lid is reduced in the cable outlet.. see new CAD pic.
Also I designed another Outlet, see the pics and the files.
Some words to the paintjob: I use spray varnish (acrylic), black, white and gold. just a thin fog or mist of spray over the basin, start with black and add some white for a stone-effect. add some breath of gold or silver for a nice finish.
Please check out my other mini fountain project
Enjoy the tiny table fountain on your diorama, model scene or jardiniere
| fountain_basin.stl | 634.1KB | |
| fountain_tap.stl | 212.0KB | |
| Mini_fountain_Lid_outlet.stl | 1001.9KB | |
| Mini_Well_basin_VER2.stl | 1.4MB | |
| Mini_well_lid_2.stl | 71.8KB |
