This is miniature stove for doll house (main dimensions: 70 x 60 x 100 mm).
You need to print:
1x stove_front.STL
1x stove_box.STL
4x knobGasket.STL
4x knob.STL
1x oven_door.STL
1x oven.STL
1x oven_grate.STL
1x stove_grate.STL
1x torch_S.STL
2x torch_M.STL
1x torch_L.STL
1x pot.STL
1x pot_M
1x pan
I use Zortrax filament Z-ABS
You need also:
1x small nail or 1x large paper clip to make a hinge in the door.
rigid foil (eg from a transparent dust jacket) to make a glass in the oven door
Use pliers to trim nail or paper clip in places where it protrudes.
Cut foil into the oven door so that it fits tight.
I didn't use glue because parts fits tightly, but if you need to, use it only to connect:
oven_door with cut foil and stove_box with stove_front
This is a link to all miniature furniture for dollhouse I've designed so far.
| knob.STL | 73.5KB | |
| knobGasket.STL | 17.7KB | |
| oven.STL | 69.0KB | |
| oven_door.STL | 113.3KB | |
| oven_grate.STL | 64.3KB | |
| pan.STL | 134.6KB | |
| pot.STL | 224.0KB | |
| pot_M.STL | 224.5KB | |
| stove_box.STL | 187.5KB | |
| stove_front.STL | 175.4KB | |
| stove_grate.STL | 436.2KB | |
| torch_L.STL | 24.9KB | |
| torch_M.STL | 30.5KB | |
| torch_S.STL | 25.1KB |
