Project is currently on hold as i have no time for it.
To stack racks on top of each other you can use part of paper clip with a bit of glue.
In future version I was planning to add well fitting peg or a clip to do that.
--- 1.3 ver ---
32 mm insert added
--- 1.2 ver ---
added tighter fitting shelf
modyfications to make it ligher on fillamnet
added 50 mm insert
--- 1.1 ver ---
updated 25 mm insert to better fit
added 40 mm insert
Hi, I have tried different storage options for minis and nothing really fit my needs so i decided to design my own.
Idea behind this is to have fully modular case, where you can move the shelves to match your needs, and stack one case on to another (better soltuion for this is still a work in progress)
Currently shelves are made to fit lossly in to the slots so that they can be easily moved around. In the final version there will be an optional tighter version.
Instead of insert, shelves can be easily magnetized.
Pending future additions will also include
I tried to make it easy to print and as low cost as possible.
No supports are needed for this, and brim depends on the printer (if items warp a bit, i suggest using brims)
I would appriciate some comments and suggestions.
| 25_insert.stl | 316.1KB | |
| 32_insert.stl | 78.2KB | |
| 40_insert.stl | 115.7KB | |
| 50_insert.stl | 91.0KB | |
| insert_15_cm.stl | 6.5KB | |
| left.stl | 81.5KB | |
| left_fixed.stl | 66.3KB | |
| right.stl | 66.3KB | |
| TightFit_experimental.stl | 8.1KB | |
| TightFit_lightVersion1.stl | 17.5KB |
