A variation of my further Microscope-Crosstable (thing:5829614), modified a bit to use it with a small DC-Motor (ø24 x 31 mm) as a mini drill-press. The motor may be found as "DC-Motor-791" and is powered with 2-6V =
Use a Micro Drill-Chuck like the foto provided with ø6mm neck.
Hint: Glue PLA-parts with superglue! (here: the 2 "MidTables", "GearRack" with "HolderArm" and the 4 RubberPads under the groundtable).
| 2x-Knob.stl | 23.1KB | |
| 4x-RubberPad.stl | 4.0KB | |
| Axle-Bushing.stl | 18.6KB | |
| Gear.stl | 206.1KB | |
| GearRack.stl | 60.1KB | |
| Groundplate.stl | 88.5KB | |
| Handwheel.stl | 64.1KB | |
| HolderArm.stl | 26.1KB | |
| M-Holder.stl | 35.1KB | |
| Mid-Table-B.stl | 65.5KB | |
| Mid-Table-T.stl | 63.9KB | |
| Mini-Standdrill.skp | 2.1MB | |
| Mini-Standdrill_Materials.txt | 1.8KB | |
| Mini-Standdrill_Motor-Clamp-Parts.skp | 189.1KB | |
| Motor-Clamp.stl | 88.4KB | |
| Stand.stl | 101.0KB | |
| TopTable.stl | 63.9KB |
