Mini Space Invaders Carriage (Eustathios) 3D Printer Model Free Download

Description Files (6)

Summary

This is a redesign of the Space Invaders Carriage for Eustathios printers. The main reason of the redesign was to make it smaller to increase usable build volume. Here's some of the changes:

smaller size, XY travel is about 290mm² (still less than the original carriage)
self-aligning bushings instead of graphite bushings (they use up less space)
40mm extruder fan instead of a 30mm fan (less noise)
no longer supports mounting a direct drive bondtech

Like the previous version, it is convertible between a bowden configuration and a direct drive configuration using a Printrbot Gear Head extruder. But, instead of switching, I opted for a flying extruder with a short bowden tube (more about that setup in this post). The hotend is mounted quite a bit higher than with the stock Eustathios build, so the bed probably won't reach the nozzle with the standard configuration (should work with the ballscrew bed mounts).

Parts:

2 - 5015 Radial Fans* - link to 24V version, you may need a 12V version depending on your power supply
4 - 5x5mm magnets* - for mounting the cooling duct
2 - 2W 12V LED modules* - wired in series or parallel depending on your power supply
1 - 40mm fan - 12 or 24V depending on your power supply
6 - Brass M3 Press Fit Inserts
4 - Self-aligning bushing (8mm or 10mm)
Assorted M3 Screws

Printer:
-- Eustathios

Filaments:
-- Atomic Glow in the Dark PETG
-- IAP Clear ABS

*affiliate links

E3D_Extruder_v3-0.STEP	1.4MB
E3D_Extruder_v3-0_Block.STL	36.4MB
E3D_Extruder_v3-0_Bottom_Clamp.STL	78.7KB
E3D_Extruder_v3-0_Duct.STL	8.1MB
E3D_Extruder_v3-0_Top_Clamp.STL	55.2KB
PTFE_Support_Tube_v1-4.STL	9.3MB

Mini Space Invaders Carriage (Eustathios) 3D Printer Model

Summary

Tags

You might also like