This is miniature shower cabin for doll house (main dimensions of shower tray: 100 x 100 x 40 mm).
You need to print:
1 x shower_tray.STL
1 x shower_panel.STL
1 x shower_head.STL
1 x shower_rainplate.STL
1 x shower_stick.STL
I use Zortrax filament Z-ABS and Z-ULTRAT
You need also:
1 x small piece of twine (2 mm thickness and 10 - 15 cm long) as a shower tube to connect shower_panel and shower_head
2 x screws M2 - M2.5 for connecting shower_panel to dollhouse wall (chose the right one for your case, take into account the thickness of the wall and the type of material it is made of). You can also glue it if you don't have the right screws.
1 x countersunk screw M2 x 7 mm for connecting shower_rainplate and shower_stick
Those are links for miniature toilet and miniature bathroom sink I also made.
And this is a link to all miniature furniture for dollhouse I've designed so far.
| shower_head.STL | 191.1KB | |
| shower_panel.STL | 555.7KB | |
| shower_rainplate.STL | 379.3KB | |
| shower_stick.STL | 16.3KB | |
| shower_tray.STL | 106.2KB |
