This is a mini RC car using Arduino and 3D printing technology.
It's a design where you can feel the detailed sensibility.
It can be controlled by Wi-Fi and supports removable rechargeable batteries.
The steering wheel and suspension are applied to show dynamic movement.
Although self-developed boards are needed for operation, unfortunately, boards are not sold yet.
Please refer to it because we share hardware components for competent manufacturers.
[Hardware Components]
ESP8266 Board (prototype board developed by 3DFUNS)
N20 Motor
HK-282AS Seevo motor
16340 battery
[Part]
Tire
-LEGO 30.4x14mm - x4
Screw
-T16_L48_D30_H12 - x2
-T2_L8_H3 - x1
-T2_L15_H3 - x1
-T2_L8_H3 -x3
Bushing M3_L6_H3 - x5
Shaft
-2x16mm -x2
-2x61mm -x1
Spring
-3x7mm - x3
LED
-3mm dip type - x2
Positive & negative contact parts 11x13mm - 1 pair
Coding source & ...
https://blog.naver.com/3dfuns/221489149800
Thank you~
| 10_bumper_frame.stl | 154.2KB | |
| 11_car_wheel_30pi.stl | 465.9KB | |
| 12_car_tire_30pi.stl | 282.5KB | |
| 13_searchlight_led_ver.stl | 352.2KB | |
| 14_nilly_rear_bumper.stl | 273.9KB | |
| 15_nilly_front_bumper.stl | 423.4KB | |
| 16_nilly_front_bumper_guard.stl | 65.3KB | |
| 17_rear_bumper.stl | 262.8KB | |
| 1_body.stl | 1.5MB | |
| 2_bracket_battery.stl | 374.0KB | |
| 3_rear_frame.stl | 1.8MB | |
| 4_car_frame_main.stl | 217.7KB | |
| 5_car_brk_motor_rear.stl | 751.1KB | |
| 6_car_brk_link_front.stl | 84.3KB | |
| 7_car_streeing_bar_servo.stl | 50.5KB | |
| 8_fender.stl | 221.9KB | |
| 9_front_bumper_with_guard.stl | 135.8KB | |
| car_link_motor_front.stl | 67.7KB | |
| car_steering_block_left.stl | 76.7KB | |
| car_steering_block_right.stl | 76.7KB | |
| gear_pinion_m1_10t.stl | 249.2KB | |
| gear_spur_m1_15t.stl | 245.6KB | |
| guide_1.stl | 550.9KB | |
| light_bumper_front.stl | 49.7KB | |
| searchlight_cap.stl | 127.4KB | |
| side_mirror.stl | 112.6KB |
