Mini PC Server Case Rack 3D Printer Model
The file 'Mini PC Server Case Rack 3D Printer Model' is (stl) file type, size is 49.5KB.
The file 'Mini PC Server Case Rack 3D Printer Model' is (stl) file type, size is 49.5KB.
Server case/rack for Lenovo ThinkCentres & ThinkStations.
I used a 1x6 board for the sides and top.
The face plates design makes this case fairly modular, you could make a case 6 inches tall (2 mini PCs) or 6 feet tall (36 mini PCs stacked) if you wanted.
This is Version 1, I've had different ideas on how to make the frame but since I have my setup pretty much complete I haven't revised anything beyond basically just using wood screws into the boards to hold everything together. You could use 20mm x 20mm extrusion, drill holes all the way through the wood boards and use long threaded bolts. Up to your imagination to go from where I left off here.
Please enjoy my contribution back to the community!
| lenovoThinkCentreFaceplate.stl | 57.3KB | |
| netgearNetworkSwitchFaceplate.stl | 77.8KB | |
| switchPanelPortsFaceplate.stl | 35.0KB |
![MIT Cre[at]e Challenge Prototype For People With Autism 3D Printer Model](https://res.3axis.co/3abd08a8-3210-4df3-a582-5dd56b9cbf17/images/cb9406f8-d4f9-4b59-9f6c-4384203004f7_thumb.jpg)
