Mini Milk Crate 3D Printer Model
The file 'Mini Milk Crate 3D Printer Model' is (stl) file type, size is 274.51 KB.
The file 'Mini Milk Crate 3D Printer Model' is (stl) file type, size is 274.51 KB.
First off, Thank you to @dauntlessdesignworks who created this design! I went through all the milk crate designs and this was my favorite one. I remixed it because wanted to create a version that could be a tiny bit more functional. I also used TinkerCAD to modify this file just as he used to design it.
The changes I made were as follows:
Gave the model the ability to be printed upright
I added a thin support that runs along the bottom exterior edges which can easily be peeled off. Use a heat gun to remove any whitening that is left over.
changed the size a little to be a perfect cube (28x28x28mm)
changed the bottom a bit so that the milk crates could be pressure fit stacked on top of one another
***May 11, 2021 additions:
Lid that presses into the inside of milk crate. It doesn't interfere with the crate links. You need to use your nails to remove them. They are a bit tight at first but there wear in quickly
Lid that snaps over the crate and covers the handles. The links can't be used with this lid but the lid is much easier to remove than the other lid
Insert for 4 x SD cards. This removes the ability to use Lids or stack the crates but the
linkability still remains
| Crate_Inner_lid.stl |
| Crate_Outer_Lid.stl |
| Milk_Crate_Link.stl |
| Mini_Milk_Crate.stl |
| SD_crate_insert.stl |
| Switch_crate_insert.stl |
